Last updated: 2026-11-15 · By the ZhiShuYun Research Team
They solve different problems. GS1 Digital Link is an identification and resolution standard: it turns a GTIN into a web-resolvable URI, so one QR code can carry product identity plus batch or serial data. A Digital Product Passport (DPP) is a regulatory data record required by EU ESPR, with defined data fields, access levels and update rules. In practice you use GS1 Digital Link as the identifier and carrier, and the DPP as the payload the identifier resolves to.
| GS1 Digital Link | Standard for web-resolvable product identifiers (GTIN + batch/serial), maintained by GS1 |
| DPP | Regulatory data record under EU ESPR (Regulation (EU) 2024/1781) |
| Relationship | Digital Link is commonly used as the DPP data carrier and identifier scheme |
| Scope | Digital Link is global and voluntary; DPP is EU-mandated per product group |
| Barcode compatibility | Digital Link codes can be read by modern POS while still resolving to a web page |
GS1 Digital Link specifies how to encode product identification — GTIN, batch, serial, expiry — into a URI structure that can sit inside a QR code. Instead of pointing at a random landing page, the QR carries the identifier itself, and the resolver decides where to send the scanner based on the identifier and context.
That design means one printed code serves retail scanning, consumer information and regulatory lookups at the same time. It is the reason Digital Link is the usual carrier choice for DPP and for retail and customs use cases.
A DPP adds regulated content on top of identification: which fields must exist, who can see which layer, how the data is verified, and how it is updated over the product's life. Those requirements come from the ESPR framework and product-specific delegated acts, not from GS1.
So a company can be perfectly compliant with GS1 Digital Link and still fail a DPP obligation, because the failure is in the data, not the code format.
Build the identifier layer first — it is stable, cheap and reusable across every downstream requirement: EU DPP, retail scanning, Russian marking, customer-facing traceability. Then layer the regulated data model on top as each delegated act applies to your product groups.
A practical sequencing rule: identifier and resolution now; data model per product group as its deadline approaches; verification and audit trail continuously.
Not globally. It is a GS1 standard. Regulatory drivers — such as EU DPP and retail scanning requirements — make it the practical choice, but the obligation comes from those rules, not from GS1 itself.
The regulation allows standards-based identification; GS1 Digital Link is the most widely supported option and is what retail, customs and many regulators expect.
No. Modern POS systems can decode the identifier offline; the resolution step is only needed for web content such as a passport.
The code format can be the same Data Matrix or QR; the identifiers and the registration back-ends differ. Usually you print per destination rather than reusing a single code across both systems.
GM2D is the GS1 migration programme toward 2D codes at point of sale, with a 2027 horizon. It aligns with Digital Link adoption and is a separate initiative from the EU DPP regulation.
Sequence matters: identifier first, payload second
Digital Link and the DPP are complements, not alternatives — the standard carries identity, the regulation defines the payload. Building the identifier layer first keeps every later requirement on one printed code instead of a second packaging change.